This page shows the wiper systems specially developed for telescopic steel covers. For particular requirements such as limited space for mounting or use in the presence of high volumes of chips produced, we also offer suitable solutions.
C Series Wiper Sysytems
- Same design for all types of C wipers
- Highly wear-resistant polyurethane lips ensuring optimum resistance to water, coolants, chemicals and oil
- Various Shore hardnesses available as required (dry, fluid and mixed machining, as well as native oils)
C2
- Smallest wiper of the“C” series
- Replaceable wiper lips
- Very little space required (regarding the mounting height and depth)
- Also available with a rubber profile vulcanized on the profiled support, for optimum damping properties at high traverse speeds (illustration: C2 with damper)
C3
- Wider profile to ensure a better adhesion when spotwelding it to the box
- Replaceable wiper lips
- Very little space (mounting height) required
- Can be screwed onto the cover box
- Optimum rigidity of the cover box in the wiper area
- Available with and without damper (illustration: C3 without damper)
C5
- Designed for large covers
- Replaceable wiper lips
- A combination of C5 and C3 wipers is possible
- Optimum rigidity of the cover box in the wiper area
- Enlarged return gutter to ensure a rapid draining of the coolant
- Available with and without damper (illustration: C5 with damper)
C6
- Latest wiper generation – can be replaced directly on the machine without disassembling the steel cover.
- Time saving and cost-effective
- Enlarged return gutter to ensure a rapid draining of the coolant.
- Available with or without damping (Illustration: C6 with damping)
eN Series WIPER SYSTEMS
- Used on telescopic steel covers for slideways with small cross-sections
- Wiper lip vulcanized to a flat steel profile
- Highly wear-resistant polyurethane lip, resistant to oil, coolants and microbes
- Standard length of the eN way wiper: 500 mm
- Two styles available – eN1 (smallest profile) and eN2 (larger profile) – dimensions of both are shown in the diagrams to the left of this text.
- eN1 is also available with an 8x2mm steel strip attached (eN1 8×2) and also with a 20×2 steel strip attached (eN1 20×2) – please contact us for details about these options.