STABIFLEX cable conduits are moving cable carriers which have proved successful in a wide range of applications in machine tools and machining centers. The main feature of this closed cable carrier is that through the fitting of a steel band to one of the four sides the flexible conduit can only bend in the one direction where the steel band is situated. In all other directions of movement the conduit remains stable.
- STABIFLEX cable conduits are resistant against all coolants and lubricants
normally used in the machine tool industry.
Three qualities are available (depending on the traverse speed):
- Quality N
Fitted with a steel band for
speeds of v 20 m/min.
- Quality G
Featuring a steel band fixed
with special glue for speeds
of v = 20-50m/min.
- Quality K
Featuring a synthetic band
fixed with special glue for
speeds of v = 50 m/min.
If no traverse speed is
indicated, we automatically
choose the N quality.
- To obtain the shortest possible length, it is recommended to have
the fixed connection at the mid-point of the stroke.
- When choosing the required
type of STABIFLEX, an
allowance of at least 10% per cable should be considered.
- Made of zinc plated sheet steel.
- To determine the bending radius (KR), multiply the outer diameter
of the cables to be installed by a factor of 8 to 10. However, the minimum
bending radius indicated by the cable manu-facturers is the main criterion.
- Mounting flanges are welded on both ends of the cable conduit.
- In accordance with safety
regulations, electrical continuity is maintained between the flanges and the metal conduit. The cables are loosely guided in the STABIFLEX and fastened at the moving and fixed end.
- A tandem version (two or three metal conduits on one steel band) can
be supplied to guide various cables and hoses in separate compartments.
- To ensure long-term functioning, it is necessary to guide the STABIFLEX in support angles or in a channel the length of which should be approx. ½ stroke.